Brake Release Lever; Cylinder Clutch Lever; Ignition Cut-Out Switch - Textron RANSOMES Super Certes 51 Manual De Seguridad, Funcionamiento Y Mantenimiento

6 CONTROLS
6.4

BRAKE RELEASE LEVER ________________________________________

The landroll brake is applied when the hand lever [F]
is moved to its upper position. To fully release the
landroll brake move the hand lever downwards and
pull the machine backwards.
WARNING
FOR THE SUPER CERTES ONLY:
This Machine Should Not Be Parked
On A Slope Without The Transport
Wheels Fitted.
6.5

CYLINDER CLUTCH LEVER ______________________________________

The cylinder clutch is engaged by moving the lever
[D] downwards and disengaged by moving the lever
upwards.
6.6

IGNITION CUT-OUT SWITCH ______________________________________

The ignition switch [A] is located on the front of the
engine. The engine ignition is switched on by
moving the lever to the '1' position. To stop the
engine close the throttle and move the switch to the
'0' position.
en-32
D
C
Fig. 6.4
D
C
Fig. 6.5
Fig. 6.6
F
E
B
A
F
E
B
A