Controls; Operator Presence Control - Mechanical (Opc); Landroll Clutch; Throttle Control - Textron RANSOMES Super Certes 51 Manual De Seguridad, Funcionamiento Y Mantenimiento

6.1

OPERATOR PRESENCE CONTROL - MECHANICAL (OPC) _____________

By depressing button [B], Lever [A] can be operated
thereby engaging forward drive and cylinder
rotation (Cylinder will only rotate if Cylinder clutch
is engaged see 6.4).
When handle [A] is released, button [B] will spring
back into position, blocking the operation of Lever
[A].
6.2

LANDROLL CLUTCH ____________________________________________

Pulling lever [C] towards the grip will disengage the
landroll clutch allowing the machine to be pulled
easily backwards when in confined areas.
This control is located on the left hand side of the
machine.
6.3

THROTTLE CONTROL ___________________________________________

The maximum cutting speed can be adjusted by
means of this control. To adjust the engine revs.
move the hand lever [E] downwards to increase or
upwards to decrease the engine revs.
D
C
Fig. 6.1
D
C
Fig. 6.2
D
C
Fig. 6.3

6 CONTROLS

F
E
B
A
F
E
B
A
F
E
B
A
en-31