Engine Weekly: (Every 50 Working Hours) 53 Machine - Textron RANSOMES Super Certes 51 Manual De Seguridad, Funcionamiento Y Mantenimiento

11 LUBRICATION
11.4 MACHINE ______________________________________________________
Before using the machine for the first time, lubricate the
following points using an grease gun and recommended
grease:
Cutting cylinder bearings [A] (Fig. 11.4a).

Landroll clutch [A] (Fig. 11.4b).

Landroll [A] (Fig. 11.4c) - Marquis and Super Bowl

Machines Only
Front roll spindle

In addition to the above, oil all linkages, drive chains
and pivot points etc.
NOTE: To gain access to the landroll clutch and drive it
is necessary to remove the chain case cover.
Daily (Every 8 working hours)
Lubricate as above.
en-54
A
Fig 11.4a
Fig 11.4b
Fig 11.4c
A