Optional Kits; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Nilfisk 15ATEX Manual De Instrucciones

15ATEX

Optional kits

The following optional kits are available for converting
the vacuum cleaner:
- Dust container kit, grid, safe bag system (code 5
60363) (fig. 9).
- Absolute filter "H" kit (code 5 60364) (fig. 17).
On request, the vacuum cleaner can be supplied with
optional kits already installed. However, they can also
be installed at a later date.
Please contact the manufacturer's sales network for
further details.
Instructions describing how to fit the optional kits and
the relative operation and maintenance manuals are
supplied together with the optional kits.
DANGER !
Use only genuine optional kits supplied and
authorized by the manufacturer.

Accessories

Various accessories are available; refer to the
manufacturer's accessory catalogue.
DANGER !
Use only genuine antistatic accessories supplied
and authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with
the laws in force.
Cardboard box packing (fig. 2)
A (mm)
B (mm)
C (mm)
Weight with packing (kg)
GB
C301
15ATEX Model
600
600
1,250
49
Setting to work - connection to the power
supply
DANGER !
- Make sure that the vacuum cleaner is in
perfect condition before starting work.
- Before plugging the vacuum cleaner into the
electricity mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electricity mains.
- The plug and the power socket should be
placed in a safe and dust-free place.
- Before plugging the vacuum cleaner, check
that the switch on the control panel is off.
- Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
- Make sure that the vacuum cleaner is off.
- The plugs and connectors of the connection
cables must be protected against splashed
water.
- Make sure that connections to the electrical
mains and plug are correct.
- Use the vacuum cleaners only when the cables
that connect to the electrical mains are in
perfect condition (damaged cables could lead
to electric shocks or explosions!).
- Regularly check that the electric cable does
not show signs of damage, excessive wear,
cracks or ageing..
DANGER !
When the vacuum cleaner is operating, do not:
- crush, pull, damage or step on the cable that
connects to the electricity mains;
- disconnect the cable from the electricity mains
by removing the plug (do not pull the cable) only
when the vacuum cleaner is off.
- Only replace the electric power cable with one
of the same type as the original.
- The cable must be replaced by the
manufacturer's Service Centre staff or by
equivalent qualified personnel.
4
01/2015