Emergency Stopping; Emptying The Container; At The End Of A Cleaning Session - Nilfisk 15ATEX Manual De Instrucciones

15ATEX

Emergency stopping

Push the button "A" (fig. 4).

Emptying the container

DANGER !
Before proceeding with these operations, turn off
the vacuum cleaner and remove the plug from the
power socket.
- Before emptying the dust container it is advisable
to clean the filter (see "Shaking the primary filter"
paragraph).
- Release the dust container "A" (fig. 10), then
remove and empty it.
- Make sure that the gasket is in perfect condition
and correctly positioned.
- Place the container back in position and secure it
again.
Antistatic bag (optional)
An antistatic bag (A) can be used to collect dust (code
8 40874) (fig. 8).
In this case, the vacuum cleaner must be equipped
with optional accessories (container "B", grid "C", plug
"D") (fig. 9), (fig. 14).
GB
C301
DANGER !
- These operations can only be carried out by
trained and qualified personnel who must wear
adequate clothing, in compliance with the laws
in force.
- Take care not to raise dust when this operation
is carried out. Wear a P3 protective mask.
- The antistatic bag must only be disposed of by
qualified personnel and in compliance with the
laws in force.

At the end of a cleaning session

1 - Turn off the vacuum cleaner and remove the plug
from the socket.
2 - Wind the connection cable (fig. 13).
3 - Empty the container as described in the "Emptying
the container" paragraph. Clean the vacuum
cleaner as described in the "Maintenance,
cleaning and decontamination" paragraph.
4 - Wash the container with clean water if aggressive
substances have been vacuumed.
5 - Store the vacuum cleaner in a dry place, out of
reach of unauthorized people.
8
01/2015