Wiseup P9000 Guia Del Usuario página 2

-1× Meeting Recorder Camera
-1× USB/AV Cable
III. Operation
>> Before using, make sure that the camera is fully recharged.
>> Please make sure the Micro SD card (4GB-32GB, format it for the first usage) is
securely fitted into the camera's SD card slot, or the camera will not work. A SDHC Class 10 Micro SD
card is recommended.
[Note]: If no Micro SD card is fitted into the camera or the SD card cannot be read, the blue and yellow indicator
lights will flash four times and then turn off. The camera will shut down automatically.
3.1 POWER ON/OFF
3.1.1 Power on the camera by pressing Power Button for two seconds. The blue and yellow indicator
lights will be illuminated for five seconds. Then the yellow one will turn off, while the blue one will
stay illuminated, indicating the camera has entered into standby mode automatically.
3.1.2 Power off the camera by pressing Power Button for seven seconds when the camera is recording
or is in standby mode.
[Note]: The camera will shut down automatically if it is in standby mode without any operation more than one minute.
3.2 720P VIDEO RECORDING
3.2.1 Power on the camera by pressing Power Button for two seconds. The blue and yellow indicator
lights will be illuminated for five seconds. Then the yellow one will turn off, while the blue one will stay
illuminated, indicating the camera has entered into standby mode automatically.
3.2.2 Press Power Button once to record video with 1280×720P video resolution. The blue indicator light
will flash three times and then turn off.
3.2.3 Press Power Button once again to stop recording video. The blue indicator light will stay illuminated,
indicating the camera is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 5 minutes automatically. 2). The camera can record video
continuously for 5.5 hours on a full charge.
2 / 36