Description; Loading Conditions; Markings And Labels - MSA Beam Trolley Instrucciones De Uso

Description

2 Description
The Beam Trolley is an anchorage connector designed to function as an interface between an anchorage
beam and a fall protection, work positioning, rope access, or rescue system for the purpose of coupling the
system to the anchorage.
The Beam Trolley consists of a carriage with four (4) rollers containing anti-friction bearings which are rigidly
connected to aluminum housings. The housings are connected to a notched aluminum cross bar through
spring-loaded toggle plates, allowing the housings to be adjusted along the crossbar to attach to variously
sized beams. The cross bar includes a polyester webbing which connects to a steel swivel ring, which
provides a connection point for the user's personal fall arrest system. See section 5.5 for a diagram of the
Beam Trolley components.
When correctly installed on an appropriately-sized and designed beam, the Beam Trolley provides a move-
able anchorage point to allow a user to perform work at any point along the beam.
2.1

Loading Conditions

See loading conditions diagram below.
Fig. 1 Loading Conditions Diagram
2.2

Markings and Labels

The following labels must be present, legible and securely attached to the Beam Trolley.
US
8 Beam Trolley