Wiseup WIFI 09 Guia Del Usuario página 3

The LAN indicator light will blink yellow for 5 seconds and glow solid yellow, indicating the camera has
entered into P2P (LAN) mode.
4.2.2. Go to the WLAN Settings page on your iPhone or iPad and connect to the camera's WIFI signal.
The camera's WIFI network SSID starts with RT_******** and it will appear on your WLAN Settings
page as below:
[Note]:
If the camera's WIFI signal cannot be found on your iPhone or iPad, please recharge the battery or reset the
camera (See VIII).
4.2.3. Launch the Camwf APP. Tap + > LAN Search Devices > Device UID > OK.