Teac VRDS-25X Manual Del Usuario página 10

∑ Music search using [Ú/Æ]
buttons (MUSIC SKIP)
The beginning of any track can be easily
located using the [Ú] and [Æ] music
skip buttons during playback or in the
pause mode. This operation is indicated
clearly in the TRACK display.
∑ To skip to the next track
When the [Æ] button is pressed during
play, the pickup will skip to the beginning
of the next track.
Each time [Æ] button is pressed, the
pickup skips forward by one track and play
starts from the beginning of that track.
O This operation is possible even in the
program playback mode. However, only
programmed tracks will be detected.
∑ To skip back to the previous track
Press the [Ú] button.
The player will skip back one track each
time the [Ú] button is pressed.
If this button is pressed in the middle of a
track, the player will skip back to the
beginning of the current track. To make it
skip back to the previous track, the button
must be pressed twice.
In this way, the player can be returned to
the beginning of the first track on the disc.
O This operation is possible even in the
program playback mode. However, only
programmed tracks will be detected.
∑ Direct track search
Select a required track number using the
[Ú] or [Æ] button with the player in
the stop mode. Pressing the play [∏] or
pause [ƒ] button allows the player to
search the selected track and play it.
_ 10 _
∑ Index Search
Index Search is possible using the [{
index }] buttons. This allows direct
access to any desired points on discs
where INDEX codes have been encoded.
1. Select the required track within which
the desired Index code is encoded,
using the numeric buttons.
2. Press the [{ index }] buttons until
the desired Index number appears in
the INDEX display.
INDEX number
O The player skips to the selected INDEX
point and playback starts from the point
at which the designated Index code is
encoded.
O If the Index number designated
exceeds the highest Index number in
the selected track, playback will begin
from the portion with the highest Index
number in the track.
O While the player searches the
designated Index point, the time
counter displays no time information.
During this interval, no control buttons
except the stop [∑] and [open/close]
buttons can be engaged.
Index code:
A track is divided into several codes. An
index here refers to a code number in a
track. A disc encoded with index numbers
displays the mark.
∑ Direct index search
After selecting a required track number
using the [Ú / Æ] buttons with the
player in the stop mode, select the
required index number using the [{
index }] buttons. Playback starts from
the selected index point.
Auto Spacing
This function is useful for locating the
beginning of tracks to be recorded to an
MD or tape.
When this function is activated, an interval
of approx. 4 seconds will be inserted
between tracks automatically, so they are
played back with a fixed spacing.
1. Press the [auto space] button.
The AUTO SPACE indicator lights.
2. Press the play [∏] button.
O To release the auto space mode, press
the [auto space] button again.