Wiseup C7000 Guia Del Usuario página 5

you press a button.
[Note]:
1). If no Micro SD card is fitted into the camera, the blue indicator light will flash for 15
seconds and then the camera will shut down automatically.
2). The camera will shut down automatically if it is in standby mode without any operation
more than 1 minute.
8.1. VIDEO RECORDING
8.1.1. Press Button A to turn on the camera. The blue indicator light will stay
illuminated, indicating the camera has entered into standby mode.
8.1.2. Press Button B on the remote control once to start video recording. The
blue indicator light will flash 3 times and then go out, indicating the camera is
recording video.
8.1.3. Press Button B once again to stop video recording and the camera will
return to standby mode automatically.
[Note]:
1). Video files will be saved every 3 minutes.
2). Video Resolution: 1080P Video Format: AVI
3). The camera is able to record video for 2.5 hours continuously on a full charge.
8.2. MOTION DETECTION RECORDING
8.2.1. Press Button A to turn on the camera. The blue indicator light will stay
illuminated, indicating the camera has entered in standby mode.
8.2.2. Press Button D once to enable motion detection recording function. The
blue indicator light will flash twice and then go out.
8.2.3. The camera will record video automatically when a movement is
detected.
8.2.4. Press Button D once again to disable the motion detection recording
function and camera will return to standby mode automatically.