General Safety Instructions; Battery Pack And Charger Safety Instruc- Tions - Festool C 15 Li Manual De Instrucciones Original

Taladro atornillador de bateria
Ocultar thumbs Ver también para C 15 Li:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
C 15 Li, C 18 Li
GB
Original operating manual
1
Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
Mains voltage (input) and frequency
Voltage (output)
Rapid charging max.
Permitted temperature range
Safety class II
Charging times
Capacity
Weight
2
Safety instructions
2.1

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2
Machine-specific safety notices for cordless
drills
– Hold power tool by insulated gripping surfaces,
12
All manuals and user guides at all-guides.com
– Use suitable detectors to determine if utility
– Wear suitable protection: such as ear protection,
– Hold the power tool firmly in your hand. Adjust
– Do not use the power tool in the rain or in damp
– Do not lock the on/off switch permanently!
2.3
– This charger can be operated by persons with re-
– Do not open the battery pack or the charger!
– Prevent metal parts (e.g. metal chips) or fluids
– Risk of explosion! Do not use battery packs or
– Protect the battery pack from excessive heat > 50
– Never use water to extinguish burning li-ion bat-
– Check the plug and the cable regularly and
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring. Cutting accessory or fasteners contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
lines are hidden in the work area or call the lo-
cal utility company for assistance. Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pene-
trating a water line causes property damage or
may cause an electric shock.
safety goggles, a dust mask for work which gener-
ates dust, and protective gloves when working with
raw materials and when changing tools.
CAUTION! Power tool can block and cause
sudden kickback! Switch off immediately!
the torque correctly for screwing. Be prepared
for a high reaction torque, which may cause the
power tool to turn and possibly lead to injury.
surroundings. Moisture in the power tool may
cause a short circuit and burning.
Battery pack and charger safety instruc-
tions
duced physical, sensory or mental capabilities or a
lack of practical experience and knowledge, pro-
vided they are supervised or have been instructed
to use the machine safely and understand the dan-
gers of machine operation. Children are not al-
lowed use or play with the machine.
from entering the charger!
chargers from other manufacturers!
°C or constant heat sources such as sunlight or
naked flames!
tery packs! Use sand or a fire blanket.
should either become damaged, in order to avoid

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C 18 li

Tabla de contenido