Rapid ESN114 Instrucciones página 6

Ocultar thumbs Ver también para ESN114:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
tool. Do not use a power tool
while you are tired or under
the infl uence of drugs, alco-
hol or medication. A moment
of inattention while operating
power tools may result in serious
personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source and/or battery
pack, picking up or carrying
the tool. Carrying power tools
with your finger on the switch or
energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating
part of the power tool may result
in personal injury.
e) Do not overreach. Keep
proper footing and balance at
all times. This enables better
control of the power tool in
unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewellery
or long hair can be caught in
moving parts.
g) If devices are provided for the
connection of dust extraction
6
and collection facilities, ensure
these are connected and
properly used. Use of dust col-
lection can reduce dust-related
hazards.
h) Do not let familiarity gained
from frequent use of tools
allow you to become
complacent and ignore tool
safety principles. A careless
action can cause severe injury
within a fraction of a second.
4) POWER TOOL USE AND
CARE
a) Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool if
the switch does not turn it on
and off. Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/or the
battery pack from the power
tool before making any adjust-
ments, changing accessories,
or storing power tools. Such
preventive safety measures redu-
ce the risk of starting the power
tool accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of untrai-
ned users.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Esn530

Tabla de contenido