Fein ASye 636 Kinetik Manual Del Usuario página 11

All manuals and user guides at all-guides.com
ASye/ASke 636 - Buch Seite 11 Mittwoch, 27. September 2000 9:04 09
ASye 636 Kinetik / ASke 636 Kinetik
Spare parts.
The overview of spare parts is at the end
of these operating instructions. Quoting
the parts no. (1), order no. (2) as well as
the number of spare parts (3) facilitates
the ordering procedure.
Specifications.
Order number
Type
Rated input
Output
Current type
On-load speed
No-load speed
Weight
Class of protection
Drill bit Ø steel
Drill bit Ø light metal
Drill bit Ø wood
Tapered spindle on the drilling shaft
Drill collar diamete
The A-weighted sound pressure level of the power tool is typically 78 dB (A). During
operation of the power tool the noise level may exceed 85 dB (A).
Wear ear protection!
The hand/arm vibration is typically less than 2.5 m/s
Measured values are determined according to EN 50 144.
Accessories.
Illustrations and order numbers can be
found at the end of these instructions.
Description of the accessories:
A Ring gear drill chuck with drill chuck
spanner.
B Quick-clamping drill chuck.
C Quick-clamping drill chuck with chuck-
ing power lock.
D Wedge drifts (two) for removing the
drill chuck.
E Metal carry case
(390 x 240 x 110 mm).
F Carry case, plastic
(305 x 265 x 90 mm).
7 201 63
ASye 636 Kinetik
320 W
180 W
1 ~
0 – 2150/min
0 – 4080/min
1.2 kg
II
6 mm
8 mm
12 mm
B 12
33 mm
2
.
EN
7 201 62
ASke 636 Kinetik
0 – 830/min
0 – 1570/min
1.25 kg
10 mm
15 mm
20 mm
11