Chevrolet Beretta/Corsica 1991-1996; Chevrolet Camaro/Pontiac Firebird 1982-1992; Chevrolet Cavalier 1991-1994 - Metra T 4544-444 Instrucciones De Instalación

Chevrolet Beretta/Corsica
1991–1996
1. Using a flat-blade screwdriver, carefully pry
outward on the plastic console trim ring around the
factory radio. Remove the trim ring and set aside.
(Figure A)
2. Remove the (2) Phillips screws holding the factory
radio, remove the radio unit itself and disconnect
wiring from the rear of the unit.
3. Locate Metra Bracket #7. (Figure B)
Continue to "Installation Instructions,
ALL VEHICLES".
(Figure A) (Figure B)
Dash Disassembly 4544-444
Chevrolet Camaro/Pontiac
Firebird 1982-1992
1. Remove the (4) torx-head screws from the plastic
trim ring around the factory radio. (Figure A)
2. Remove the trim ring itself and set aside.
3. Remove the (4) Phillips screws holding the factory
radio, remove the radio unit itself and disconnect
wiring from the rear of the unit.
4. Locate the Metra Bracket Set #2. Then, using wire
cutters, cut and remove all mounting tabs on the
Bracket Set EXCEPT the tabs marked on the back
with a letter "A". (Figure B)
Continue to "Installation Instructions,
ALL VEHICLES".
(Figure A) (Figure B)
13
®
1. Using a flat-blade screwdriver, carefully pry
outward on the plastic console trim ring around the
factory radio. Remove the trim ring and set aside.
(Figure A)
2. Remove the (2) Phillips screws holding the factory
radio, remove the radio unit itself and disconnect
wiring from the rear of the unit.
3. Locate the Metra Bracket Set #3.
Then, using wire cutters, cut and remove all
mounting tabs on the Bracket Set EXCEPT the tabs
marked on the back with a letter "B". (Figure B)
Continue to "Installation Instructions,
ALL VEHICLES".
"A"
(Figure A)
Chevrolet Cavalier
1991–1994
"B"
"B"
(Figure B)