Connections To Various Main Power Supplies; Instructions For The User; Cooking Plates - MBM MINIMA Serie Instrucciones Para La Instalación, El Uso Y El Mantenimiento

2.3.4

CONNECTIONS TO VARIOUS MAIN POWER SUPPLIES

3N AC 380...415 V 50/60 Hz
2N AC 380...415 V 50/60 Hz
3 AC 220...240 V 50/60 Hz
1N AC 220...240 V 50/60 Hz
3.
3.1

COOKING PLATES

The cooking plate is treated with a protection paint. On first using it, we therefore suggest to set the knob (Fig. 1) on position
3, leaving it on for approx. 5 minutes.
Optimum crockery should have a fully flat or slightly cambered base, in order for it to adhere completely to the element
surface during heating: this allows a perfect heat transfer from the element to the pan.
We recommend the use of pans having a diameter equal to that of the cooking element.
Do not rest kitchenware or lids of any kind on the elements.
When the element is functioning with no pan on its top or unsuitable pans are used (e.g., small in diamater or poor in
quality), a thermostat device prevents overheating by limiting its power.
WARNING
On first operating it or at any rate after a long period of inactivity, so as to eliminate any humidity absorbed, you should dry
up the element by turning it on for 30 minutes with the switch on position No. 1.
- Wipe dry the pan bottom before placing it on the cooking plate.
- Turn on the cooking plate only after you have placed the pan on its top.
GB
PE (Ground) yellow-green
N (NP) light blue
L (T) black
3
L (S) black
2
L (R) brown
1
PE (Ground) yellow-green
N (NP) light blue
L (S) black
2
L (R) brown
1
PE (Ground) yellow-green
N (NP) light blue
L (S) black
2
L (R) brown
1
PE (Ground) yellow-green
N (NP) light blue
L (R) brown
1

INSTRUCTIONS FOR THE USER

- 12 -
Tab. 3