Setting The Clock; Cassette Player; Listening To A Tape; Fast-Winding The Tape - Sony XR-4750RDS Manual De Instrucciones

Setting the clock

The clock has a 24-hour digital indication.
For example, setting it to 10:08
1
Press (OFF) or (DSPL) during operation.
2
Press (DSPL) for two seconds.
The hour digit blinks.
1 Set the hour digits.
1000
2 Press (SEL) momentarily.
EN
1000
The minute digit blinks.
3 Set the minute digits.
1008
3
Press (DSPL) momentarily.
1008
The clock activates.
Note
If the POWER SELECT switch on the top of the unit is set
to the B position, the clock cannot be set unless the power
is turned on. Set the clock after you have turned on the
radio.
4
All manuals and user guides at all-guides.com
100
to go forward
to go backward
to go forward
to go backward

Cassette Player

Listening to a tape

Insert a cassette.
Playback will start automatically.
If a cassette is already inserted, press
(SOURCE) repeatedly until "PLAY" is
displayed.
FWD
The side facing up is being played.
REV
The side facing down is being played.
Tip
To change the tape transport direction, press (MODE)
(*) during tape playback.
To
Stop playback
Eject the cassette

Fast-winding the tape

During playback, press either side of
(SEEK/AMS) more than two second.
Fast-forward
SEEK
AMS
Rewind
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
Press
(OFF)
6