Playing A Tape In Various Modes - Sony XR-4750RDS Manual De Instrucciones

Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
To locate the succeeding tracks
SEEK
AMS
To locate the preceding tracks
Note
The AMS function may not work when:
• the blanks between tracks are shorter than 4 seconds.
• there is noise between tracks.
• there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) during tape
playback, the displayed item changes as
follows:
z Tape playback z Clock
* While the AF/TA function is activated.
Playing a tape in various
modes
Searching for the desired track
— Intro scan
Press (1) during playback.
"INTRO" appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again.
The unit returns to the normal playback mode.
Playing tracks repeatedly
— Repeat play
Press (2) during playback.
"REP" appears on the display.
When the current played track is over, it will
be played again from the beginning.
To cancel this mode, press again.
All manuals and user guides at all-guides.com
Switching to the radio while fast-
winding a tape
— Automatic Tuner Activation (ATA)
When fast-forwarding or rewinding with
(SEEK/AMS) for two seconds, the tuner will
turn on automatically.
To cancel this function, press (5).
Skipping blanks during tape
playback — Blank skip
Blanks longer than eight seconds will
automatically be skipped during tape
playback.
z Frequency*
To cancel this function, press (6).
Playing a CrO
To cancel this function, press (4).
Press (5) during playback.
"ATA" appears on the display.
Press (6) during playback.
"BL.SKIP" appears on the display.
or metal tape
2
Press (4) when you want to listen to a
CrO (TYPE II) or metal (TYPE IV) tape.
2
"MTL" appears on the display.
EN
5