Etac molift Mover 300 Manual De Usuario página 13

Plan the lifting operation in advance to ensure that
it is as safe and smooth as possible. Remember
to work ergonomically. Assess the risks and take
notes. The assistant is responsible for the safety of
the user.
Molift Mover 300 can be used with 4-point sling
bar for different types of transfers; sitting, recum-
bent or ambulating.
Using slings
It is important that the sling has been tested with
the individual user and for the intended lifting
situation.
Read user manual for the sling
prior to use.
Do not to use damaged or badly
worn slings.
Slings made by other manufacturers
We recommend only using Molift slings. Etac shall
not be liable for faults or accidents that can occur
when using slings made by other manufacturers.
Lifting and lowering
When moving the user, stand to the side of the
person you are lifting. Make sure that arms and
legs do not obstruct the seat, bed, etc. Keep eye
contact with the user to help them feel safe.
The sling bar must always be positioned across
the user, to prevent the user from unintentionally
sliding out of the sling.
All manuals and user guides at all-guides.com
Transfer
The sling bars hook design prevents sling to be
inadvertently detached when mounted correct.
1. Check that the sling is correctly fitted around
2. Stretch the sling straps without lifting the
3. Lift user, and perform transfer.
Supporting arms (optional)
The lifter can be used for gait training with sup-
porting arms.
Lifter can be delivered with supporting arms, or
complete lifting column with supporting arms can
be delivered as an accessory to swap with original
lifting column.
Column with supporting arms
13
the user and that the strap loops are correctly
fitted to the sling bar hooks.
user. Ensure that all four loops of the sling are
securely fastened to avoid the user slipping or
falling.
Art. no. 1511002
Molift Smart 150 / www.etac.com