Product Identification - Etac molift Mover 300 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 116
Molift Smart 150 / www.etac.com
Declaration of conformity
The Molift Mover 300 and related accessories described in this operator manual are CE
marked in accordance with EU Council Directive 93/42/EEC concerning medical devices, class
1, and has been tested and approved by a third party according to standards IEC 60601-1, IEC
60601-1-2 and NS-EN ISO 10535:2006.
Conditions for use
Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use
the equipment and accessories covered by this user manual.
Modifications and use of components made by other manufacturers.
We recommend only using Molift components and spare parts. Declaration of conformity is not valid
and Etac is not responsible for warranty if any modifications are made to the product. Etac shall not be
liable for faults or accidents that can occur when using components made by other manufacturers.
Only certified personnel are allowed to open lifter or accessories to perform service
or repair. Risk of injury from rotating parts and electric shock.
The lifter is not intended to be operated by the person being lifted.
Warranty
2-year warranty against defects in workmanship and materials of our products.
For terms and conditions, see www.etac.com

Product identification

Product label
The product labels barcode contain article number,
serial number and production date.
All manuals and user guides at all-guides.com
General
Warning labels and symbols
Symbols used on the product, explained in more
detail:
6
Type BF applied part
CE marked
60601-1
Refer to user manual
Indoor use only
YYYY-MM-DD
Do not dispose in
general waste
Emergency lowering
Service indicator
Battery indicator
Certification body mark
Manufacturer
Date of manufacture
Catalogue number
Serial number
Medical Device

Publicidad

Tabla de contenido
loading

Tabla de contenido