Use At Fixed Position, Replacing Nozzle And Shutting Down; Replacement Nozzle - Maruyama MS073D Manual De Funcionamieno Para Usuarios Y Propietario

Use at fixed position,
replacing nozzle and
shutting down
Use at fixed position
Connecting method of hose when sucking water
from the separate tank in case of operating at fixed
position. (Hose, strainer, etc., are optional acces-
sories.)
(1)Remove suction and spillway hose from the
tank.
(2)Insert respective hose connection into suction
and spillway hose, and fix them using plate
Drain hose
Suction hose
Plate band
Connect
All manuals and user guides at all-guides.com

Replacement nozzle

Suction hose
Strainer
Spillway hose
10
(1)Round nozzle 25 (Optional accessory)
Exclusive nozzle for rounding up weed
remover.
(2)Replacement nozzle tip C-6 (Optional acces-
sory)
a. Using replacement nozzle tip, about 1.5
times of spray volume is available com-
pare to standard nozzle.
b. When large volume of spray or large vol-
ume of spray at low pressure is necessary,
this replacing nozzle can be used.
c. C-6 is indicated on the surface of replace-
ment nozzle tip.(C-35 is standard)
d. Replacement can be done by loosening
the screw of the nozzle cap. When replac-
ing, stop the machine. Close ball cock.
Cap
Nozzle tip
Packing
Spray pipe
English