Oil Feeding And Mixing - Maruyama MS073D Manual De Funcionamieno Para Usuarios Y Propietario

Oil feeding and mixing

Oil feeding
Make sure you use blended fuel.
Gasoline :
Use exclusive oil for two-cycle engine engines.
Neither overfill nor
spill the fuel on to
the engine.
DANGER
There is a possibility of fuel igniting. Make sure
you observe the following items.
When feeding fuel, stop the engine and
ensure no source of fire such as cigarette is
close to the area.
Don't spill fuel. If fuel is spilled, wipe it all off
at once and start the engine after it is dry.
Don't feed fuel above the standard line.
There is the possibility of leakage.
When a fuel leakage is found, use the
engine after repair are done.
After feeding fuel, make sure you close the
fuel tank cap.
When starting the engine, be more than
three meters from the supply tank.
All manuals and user guides at all-guides.com
exclusive oil
6
CAUTION
If operating the machine with gasoline
alone, the engine will seize.
Make sure to mix exclusive two-cycle engine
oil in the specified quantity.
The mixing ratio shall be the designated
ratio for exclusive two-cycle engine oil.
Use lead-free gasoline for automobiles for
fuel.
Mixing chemicals
Read the instructions for the chemical to be
used carefully and follow the mixing method
and cautions for use.
chemical tank lid
After confirming the proper placement of the
chemical cover, close the cover securely.
Otherwise, chemicals will spill and you might
be covered with them when you carry the
machine on your back.
Close securely
English