Step 10, Install Filters; Step 11, Finalize Installation - Monogram ZV850 Instrucciones De Instalación

Ocultar thumbs Ver también para ZV850:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLATION – VENTED TO THE OUTSIDE
10
INSTALL FILTERS
• Remove protective film on filters.
• Tip the filter into the lower channel at the rear
of the opening. Push back, lift and pull the knob
forward until the filter rests on the channel.
Lower Filter
Channels
• Install all three metal grease filters.
294Dia5
11
FINALIZE INSTALLATION
• Remove the protective film covering the control panel
on the front face of the hood and any other packaging
materials.
• Make sure the filters are seated properly when
installed and the filter light is not on.
658Dia26
All manuals and user guides at all-guides.com
Installation Instructions
16
• Turn power on. If the filter light on the control panel
glows, adjust the right-side filter in the channel to
engage the switch arm.
294Dia7
• Be sure fan and lights operate correctly. Refer to
the Owner's Manual for operating instructions
and the Problem Solver.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zv855

Tabla de contenido