Working With The Machine; Acoustic Warning Signals; Service And Maintenance - Festool T18+3 Manual De Instrucciones

3
11.5 Tool holder in the drill spindle [8]
Bits can be inserted directly into the hexagon
socket holder of the drill spindle.

12 Working with the machine

WARNING
Risk of injury
► Always secure the workpiece in such a
manner that it cannot move while being
machined.
12.1 Bit depot [1-4]
Magnetic, for storing bits and bit holders.

12.2 Acoustic warning signals

Acoustic warning signals sound and the ma­
chine switches off in the following operating
states:
2
1
EX-UNI
7

13 Service and maintenance

Risk of injury, electric shock
► Always disconnect the battery pack from
the machine before any cleaning or main­
tenance!
Any maintenance or repair work that re­
quires opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
8
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power cord or oth­
er components, which in turn can lead to
accidents with serious consequences.
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festoolusa.com/service
Battery flat or machine over­
loaded.
– Change the battery.
– Place the machine under
reduced stress.
Machine is overheating.
– You must allow the ma­
chine to cool beforeusing
again.
LiIon battery pack is faulty or
has overheated.
– Once the battery pack has
cooled, perform a func­
tional check using the
charger.
WARNING
WARNING
CAUTION
English
15