Working With The Machine; Service And Maintenance; Accessories - Festool C 18 Li Manual De Instrucciones Original

11 Working with the machine

WARNING
Risk of injury
► Always secure the workpiece in such a
manner that it cannot move while being
machined.
11.1 Bit depot [1-2]
Magnetic, for storing bits and bit holders.
11.2 Acoustic warning signals
Acoustic warning signals sound and the ma­
chine switches off in the following operating
states:
Battery flat or machine over­
loaded.
– Change the battery.
– Place the machine under
reduced stress.
Machine is overheating.
– You must allow the ma­
chine to cool beforeusing
again.
LiIon battery pack is faulty or
has overheated.
– Once the battery pack has
cooled, perform a func­
tional check using the
charger.

12 Service and maintenance

7
Risk of injury, electric shock
► Always disconnect the battery pack from
the machine before any cleaning or main­
tenance!
Any maintenance or repair work that re­
quires opening of the motor or gear housing
should only be carried out by an authorised
Customer Service Centre (name supplied by
your dealer)!
► Maintenance or repair work carried out by
an unauthorised person can lead to the
wrong connection of the power cord or oth­
er components, which in turn can lead to
accidents with serious consequences.
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
EKAT
4
5
3
2
1
Keep the contacts on the power tool, charger
and battery pack clean.
To ensure constant air circulation, always keep
the cooling air openings in the motor housing
clean and free of blockages.

13 Accessories

Use only original Festool accessories and
Festool consumable material intended for this
machine. These components are designed spe­
cifically for this machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your results
and limit warranty claims. Machine wear or
WARNING
WARNING
CAUTION
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festool.com/service
Always use original Festool spare
parts. Order no. at:
www.festool.com/service
English
13