Renault Radio Connect R & GO Manual Del Usuario página 31

SYSTEM SETTINGS (3/3)
BT settings (Bluetooth®)
Go to the phone menu by pressing 7
then select the section "Settings" by
pressing 6, 21 or 22 on the steering
column control (depending on the vehi-
cle).
The available settings are:
– "Volume": adjust the ringtone or call
volume;
– "Ringtone": activate the vehicle's
ringtone or the one transferred from
the phone;
To set the ringtone or call volume via
Bluetooth®, select "Volume" by turning
and pressing 6, 21 or 22 on the stee-
ring column control (depending on the
vehicle).
A new sub-menu appears:
– "Ringtone";
– "Call";
Pressing 10 takes you back to the
previous menu.
All manuals and user guides at all-guides.com
– select one of two sections by tur-
ning 6, 21 or 22 (depending on the
vehicle), and then press 6, 21 or 22
on the steering column control (de-
pending on the vehicle);
– turn 6, 21 or 22 left or right (depen-
ding on the vehicle) to raise or lower
the volume, then confirm by pres-
sing 6.
To activate the ringtone on the vehi-
cle or the phone via Bluetooth®, select
"Ringtone" by turning 6, 21 or 22 (de-
pending on the vehicle) and pres-
sing 6, 21 or 22 on the steering column
control (depending on the vehicle).
A new sub-menu appears:
– "Car";
– "Phone" ;
– select one of the two items to be ac-
tivated by turning 6 and then press 6.
NB: For a phone paired to the system,
a new item, "Settings", appears in the
menu:
– "Update phonebook": update the
phonebook of a phone paired to the
system (e.g., add new contacts not
yet in the system).
– To update the system phonebook,
access the "Settings" menu by pres-
sing 7, and select "Update phone-
book" by pressing 6, 21 or 22 on the
steering column control (depending
on the vehicle).
Display of radio texts
Display the radio text menu by pres-
sing 12. Select "Radio", then
press 6, 21 or 22 on the steering column
control (depending on the vehicle).
The radio texts display may contain a
maximum of 64 characters.
NB: if there is no information provided,
the screen displays "No message".
For safety reasons, carry
out any adjustments when
the vehicle is stationary.
GB.27