Renault Radio Connect R & GO Manual Del Usuario página 36

R & GO: GENERAL DESCRIPTION
72 73 74
75
76
Telephone holder
(depending on the vehicle)
To attach the telephone holder 75 onto
your vehicle's multimedia system,
follow these instructions:
– remove the telephone bracket's
cover 23 by turning counter-clock-
wise to expose the USB2 socket;
– set the arrow 73 of the locking
knob 72 in the up position before
putting the phone holder 75 on the
multimedia system for correct con-
nection;
GB.32
All manuals and user guides at all-guides.com
(5/6)
– connect the telephone holder 75
76
to the multimedia system's USB2
socket;
– turn the locking knob 72 of the phone
holder 75 clockwise to secure it;
– place your phone in the telephone
holder 75 and press both clips 76
until the phone is firmly held in place.
To remove the telephone holder 75
from your audio system:
– hold your phone while pressing the
retaining clips 74, then insert your
phone;
– turn the locking knob 72 of the phone
holder 75 anticlockwise to release
it from your vehicle's multimedia
system;
– disconnect the telephone holder 75
from your vehicle's multimedia
system;
– replace the telephone holder 23
cover by turning it clockwise to close
the USB2 socket.