Playing Sources Automatically (Auto Play); Starting A Source Automatically At Power On (Auto Start) - Sony TAVE800G Manual De Instrucciones

Playing Sources Automatically
(auto play)
The AUTO PLAY function lets you set the amplifier to
start playing the programme sources immediately after
they are selected from the FUNCTION SELECT menu.
The amplifier comes with AUTO PLAY set to ON.
1
Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2
Click SET UP.
3
Click AUTO PLAY ON or OFF to select auto play
on or off.
SET UP
AUTO PLAY
FLASHER
IR OUTPUT
AUTO OSD ERASE
POINTER ONLY
DEMO
FEELING
RETURN
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
Notes
• If you select another component during playback, the
current component stops and the newly selected
component starts playing.
• The AUTO PLAY function does not work when you
operate the amplifier using the controls on the front panel.
• The AUTO PLAY function may not work for components
with poor remote control response. If you experience this,
reposition the IR repeater closer to that component to
facilitate reception of the IR command codes.
ON OFF
EXIT
Settings and Adjustments
Starting a Source
Automatically at Power On
(auto start)
The AUTO START function lets you set the amplifier to
start playing a specific programme source immediately
whenever you turn on the amplifier.
1
Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2
Click AUTO.
The AUTO START SETTING screen appears.
FUNCTION SELECT
AUTO
3
Click the component you want to start playing
automatically when the amplifier is turned on.
Only one programme source can be selected.
To automatically start the component played last the
next time you turn on the amplifier
Click LAST.
To execute a macro automatically when you turn on
the amplifier
Click MACRO 1 or MACRO 2 when the AUTO PLAY
function is ON and the programme source is specified
in the MACRO PLAY setting (see page 35).
When LAST is specified, the programme source last
played will turn on automatically the next time you
turn on the amplifier.
To cancel the AUTO START function
Click NO SET in step 3.
AUTO START will not operate when you turn on the
amplifier.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
Note
Macros containing the ALL OFF command (see page 35)
cannot be selected for use with the AUTO START function.
EXIT
37 GB