All manuals and user guides at all-guides.com
LSQT1150.book 59 ページ 2007年1月19日 金曜日 午前9時27分
To cancel the Recording guideline
function
Press the MENU button, then select [BASIC] #
[GUIDE LINES] # [OFF] and press the joystick.
≥ The guidelines do not appear on the images
actually recorded.
≥ The guidelines are not displayed while rotating
the LCD monitor frontward to record yourself.
Wide mode
This is for selecting the screen's
aspect ratio when recording motion
pictures.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
This allows you to record images compatible with
wide-screen TVs (16:9) and regular TVs (4:3).
∫ Recording images with a 16:9
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [ASPECT] > [16:9] and
press the joystick.
∫ Recording images with a 4:3
aspect ratio
¬ Rotate the mode dial to select
Press the MENU button, then select
[BASIC] > [ASPECT] > [4:3] and
press the joystick.
≥ The default setting is [16:9].
Image stabilizer function
This is for reducing image shakes
(jitter) during recording.
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
Reduces the image shaking (jitter) due to hand
movement when recording.
¬ Rotate the mode dial to select
.
Press the MENU button, then select
[ADVANCED] # [O.I.S.] # [ON] and
press the joystick.
.
To cancel the image stabilizer function
Press the MENU button, then select
[ADVANCED] # [O.I.S.] # [OFF] and press the
joystick.
≥ This function's default setting is [ON].
≥ In the picture recording mode, pressing the
MENU
Photoshot button [
effect of the image stabilizer function. (MEGA
optical image stabilizer) (VDR-D310)
≥ In the following cases, the image stabilizer
function may not work effectively.
jWhen the digital zoom is used
jWhen the unit is shaken greatly
jWhen you record a moving subject while
.
tracking it
Wind noise reduction
function
This is for reducing the wind noise
coming into the microphone when
recording.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Recording
or
MENU
] halfway increases the
59
LSQT1150