Baby auto LOLO 01 Manual De Instrucciones página 21

12. Inspect the safety straps periodically to ensure they are not worn,
paying special attention to the anchor points, the seams and the
adjustment systems.
13. The safety seat's rigid and plastic elements should be positioned
and installed so that they cannot be trapped by a moving seat or a
door during everyday use of the vehicle.
14. Always ensure that the straps securing the safety seat are
tightened and the straps securing the child fit snugly around the
body. Always check that the straps are not twisted or knotted.
15. The seat should be replaced after undergoing the violent stresses
associated with an accident.
16. Do not use anchor points that are not listed in the instruction
manual and indicated on the seat.
17. Keep this child safety seat in a secure location when not in use. Do
not store heavy objects on top of the seat. Do not allow the seat
to come in contact with corrosive substances such as battery acid.
18. This child safety seat should not be used without its cover. Covers
should not be replaced with other covers not recommended by
the manufacturer as the cover forms an integral part of the seat.
19. Read the instruction manual carefully before installing the seat.
1. overvieW
a. Headrest.
b. Chest harness.
c. Shoulder pads.
d. Belt buckle.
e. Harness adjustment button.
F. Harness adjustment strap.
G. Reclining lever.
H. Reductor cushion.
i. Harness connector.
j. Upper belt guides
(groups 0+ and 1).
k. Lower belt guides
(group 0+).
L. Recline indicator .
M. Installation groove
(group 1)).
21