Publicidad
Step 6
IMPORTANT: If you purchased the 418295 Hutch, you will
å
need to fi nish drilling through the three partially drilled holes in
the TOP (G) using your drill and 1/4" drill bit.
Fasten the TOP MOLDING (R) to the TOP (G). Use fi ve
å
BROWN 1" FLAT HEAD SCREWS (12S).
To fasten the TOP (G) to the 418295 Hutch, use three BLACK
å
1-7/8" FLAT HEAD SCREWS (2S) through the TOP and into
the Hutch Ends and Upright.
NOTE: The SCREWS to fasten the TOP to the 419295 Hutch
å
will come from the Hutch assembly.
BLACK 1-7/8" FLAT HEAD SCREW
(3 used from the Hutch assembly)
Page 10
Flat edge
418295
Hutch End
G
2S
If you purchased the 418295 Hutch,
fi nish drilling through these three holes.
R
418295
Upright
418294
BROWN 1" FLAT HEAD SCREW
(5 used for the TOP MOLDING)
G
418295
Hutch End
www.sauder.com/services
12S
Publicidad
