Configuration The Printer Using Ticket; Setting User Account - Mettler Toledo APR320 Manual De Usuario

Counts of Printer Head
Total Printed Rows
< 6,000,000
6,000,000 < total printed rows < 8,000,000
> 8,000,000

5.3 Configuration the Printer using Ticket+

Ticket+ include these menu blocks.
Level 1
Printer Information
User
Template Designs
Settings
Firmware
Data Management
About

5.3.1 Setting User Account

To add a new user account
1 Click
User
Ticket Printer
Level 2
Read only. Shows the information of the printer connected:
Printer Name
Boot Version
Font Version
S/N
Ribbon
Printer Head
User Settings
Template 1,
Template 2,
Template 3 ...
Communication
Parameters
To upgrade firmware of the printer. Refer to [Upgrading Printer Firmware Page 24]
for operation instructions.
To view, reprint, or download data from the printer. Refer to [Viewing/ Reprinting /
Downloading Data from the Printer Page 26] for operation instructions.
Shows the version of Ticket+.
> User Settings.
Color Action
Green -
Yellow Replace the printer head. Please contact
METTLER TOLEDO Service.
Red Replace the printer head immediately. Please
contact METTLER TOLEDO Service.
Level 3 Level 4
To edit access level, user name and password.
To edit print template. Refer to [Designing Print Template
Page 21] for more information.
Ethernet To edit network settings of the printer.
Editable options include:
IP Address (default 192.168.1.111)
Subnet Mask (default 255.255.255.0)
Default Gateway (default 192.168.1.1)
Serial To edit serial settings of the printer. Editable
options include:
Auto Connection (default off)
Baud Rate (default 9600)
Bits/Parity (default 8, none)
Stop Bit (default 1 bit)
Handshake (default None)
To edit printer parameters.
Using Ticket+ Printer Configuration Software​ ​ 19