Mettler Toledo APR320 Manual De Usuario página 30

2 Press
3 Select the appropriate variable value from the drop-
down list. Note： a) The variable value is set at the
weighing terminal. As a result, if the variable value is
changed at the weighing terminal, it will affect the
variable selection in Ticket+. b) If the variable value
does not come with a fixed label (like the Gross or Net
in the image shown), it is suggested to add a fixed
label text before the variable in Ticket+.
4 When the variable data are done, add a dashline by
referring to the step 10 in Step 2: Editing the Header.
Step 4: Editing the Trailer
Refer to Step 1: Editing the Header to edit the trailer of the
ticket template.
5.3.3 Upgrading Printer Firmware
Make sure the printer is connected to the host computer according to [Connecting the Printer to a Host
Computer Page 17].
1 Download the latest version of firmware from www.mt.com/apr320 to the host computer.
2 Run Ticket+ according to [Running Ticket+ Page 17].
3 Click
4 Press
24 Using Ticket+ Printer Configuration Software​ ​
to add a variable.
in Ticket+.
Firmware
to the right of Select File.
Template 4
Line No. Content Left Content Right
Template 3
Preview
Line No. Content Left Content Right Action Bar
SAVE AS SET
Firmware
Select File
Preview
Action Bar
SAVE AS SET
Custom
UPLOAD
Ticket Printer