Mettler Toledo APR320 Manual De Usuario página 29

： Variable button
： Text button
2 Press to add the image. Tip: To ensure optimum
presence of the image in the ticket, a monochrome or
black/white image is highly recommended to use.
3 In the pop-up screen, press
image from the PC.
4 Use HalfTone and Threshold to adjust the effect of the
image.
5 Use Location and Width (mm) to adjust the location
and size of the image.
6 The mosaic canvas in the right compares the original
image and the image after all parameter values are
implemented.
7 When the image setting is done, press OK.
8 Press to show the design buttons.
9 Press to add a test string. Enter the text string in the
text field. Note that there are two text fields in each line
and the texts in the two text fields are aligned
differently.
10 After the header is done, add a dashline by doing so:
Press to show the design buttons, then press
add a dashline. In the pop-up screen, enter the
character which will be used as the dashline, then click
SET.
Step 3: Editing the Variable Data
1 Press to show the design buttons.
Ticket Printer
Select Picture
, then select the desired
HalfTone
None
Threshold
Location
Left
Width (mm)
Template 4
Line No.
to
OK
CANCEL
Content Left Content Right
SAVE AS
Please enter a separate symbol.
Using Ticket+ Printer Configuration Software​ ​
Preview
Action Bar
SET
SET
23