Assigning Preset Numbers; Making A Call By Entering Phone Number; Clearing Memory - Pioneer DEH-P65BT Manual De Operación

Operating this unit
2 Press MULTI-CONTROL and hold to add
+.
# To delete +, press MULTI-CONTROL and hold
again.
3 Press MULTI-CONTROL to make a call.
While calling, DIALLING is flashing.
4 To end the call, press PHONE.
The estimated call time appears in the display
(this may differ slightly from the actual call
time).

Assigning preset numbers

Important
To perform this operation, be sure to park your ve-
hicle and apply the parking brake.
Numbers that you dial frequently can be as-
signed to presets for quick recall.
1 Select a desired phone number from
the Phone Book or the Call History.
To select a desired phone number from the
Phone Book or the Call History, see the in-
structions explained in previous pages.
2 Press and hold one of 0 to 9 on the re-
mote control to store the selected phone
number in that preset.
The selected phone number has been stored
in memory. The next time you press the same
preset button, the phone number is recalled
from memory.
Making a call by entering
phone number
Important
To perform this operation, be sure to park your ve-
hicle and apply the parking brake.
All manuals and user guides at all-guides.com
1 Use MULTI-CONTROL to select
NUMBER DIAL in the function menu.
# You can also enter in this menu from the
standby display by pressing DIRECT on the re-
mote control.
2 Push MULTI-CONTROL up or down to
select a number.
# You can also input numbers by pressing 0 to 9
on the remote control.
3 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
# Up to 24 digits can be entered.
4 When you completed entering the
number, press MULTI-CONTROL.
5 Press MULTI-CONTROL again to make a
call.
6 To end the call, press PHONE.

Clearing memory

You can clear memory of each item; Phone
Book, dialled/received/missed call history list
and preset phone number.
1 Use MULTI-CONTROL to select
CLR MEMO in the function menu.
2 Push MULTI-CONTROL up or down to
select an item.
Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
order:
PH BOOK (phone book)—MISSED (missed
call history)—DIALLED (dialled call history)—
RECEIVE (received call history)—PRESET (pre-
set phone numbers)—ALL (delete all memory)
# If you want to clear all the Phone Book,
dialled/received/missed call history list and pre-
set phone number, select ALL.
Section
02
31
En