Initial Settings; Adjusting Initial Settings - Pioneer DEH-P65BT Manual De Operación

Section
Operating this unit
02
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
38
En
All manuals and user guides at all-guides.com

Initial Settings

Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
the calendar appears in the display.
# You can also perform this operation by press-
ing and holding FUNCTION on the remote con-
trol.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order:
Calendar—Clock—FM STEP (FM tuning step)
—AM STEP (AM tuning step)—WARNING
(warning tone)—AUX1 (auxiliary input 1)—
AUX2 (auxiliary input 2)—REAR SP (rear out-
put and subwoofer controller)—TEL (tele-
phone muting/attenuation)—COLOR
(illumination color)—BT AUDIO (Bluetooth
audio)—PIN CODE INPUT (pin code input)—
EDIT DEVICE NAME (device name edit)—
BT INFO (Bluetooth version information)—
BT RESET (Bluetooth reset)
Use the following instructions to operate each
particular setting.
# You can also select the function by pressing
FUNCTION on the remote control.
# To cancel initial settings, press BAND.
# In some cases, you cannot select BT AUDIO
when the bluetooth audio player has been con-
nected.