Introduction; Transport, Storage And Handling - Mondolfo Ferro AQUILA RAPTOR Manual De Uso

INTRODUCTION

The purpose of this manual is to furnish the
owner and operator with a set of practical,
safe instructions on the use and maintenance
of the tyre changer.
Follow all the instructions carefully and the
machine will give you the efficient and long-
lasting service that has always characterised
the manufacturer's products, making your work
considerably easier.
The following points define the levels of danger
regarding the machine, associated with the
warning captions found in this manual:
DANGER
Refers to immediate danger with the risk of
serious injury or even death.
WARNING
Dangers or unsafe procedures that can cause
serious injury or even death.
CAUTION
Dangers or unsafe procedures that can cause
minor injuries or damage to property.
Read these instructions carefully before powe-
ring up the machine. Keep this manual and all
illustrative material supplied with the machine
in a folder near the tyre changer where it is
readily accessible for consultation by the ma-
chine operators.
The technical documentation supplied is con-
sidered an integral part of the machine; and
must always accompany the equipment if it is
sold or transferred to a new owner.
The manual is only to be considered valid for the
machine of the model and with the serial number
indicated on the nameplate applied to it.
WARNING
Observe the contents of this manual: The
producer declines all liability in the case of
uses of the machine not specifically described
and authorised in this manual.
WARNING
This machine must be used only by qualified
and authorised personnel. A qualified operator
is construed as a person who has read and
understood the tyre changer manufacturer's
instructions as well as the tyres and wheel
rims manufacturers', is suitably trained, and
is conversant with safety and adjustment pro-
44
cedures to be adhered to during operations.
Use of the machine by unskilled staff may
constitute a serious risk for the operator and
for the final user of the product processed
(the wheel rim and tyre assembly).
NB:
Some of the illustrations in this manual have
been taken from photographs of prototypes:
standard production machines may vary in
some respects.
These instructions are intended for people with
basic mechanical skills. We have therefore
omitted detailed descriptions of procedures such
as how to loosen or tighten the fixing devices
on the machine. Do not attempt to perform
operations unless properly qualified and with
suitable experience. In case of need, contact an
authorised Service Centre for assistance.
TRANSPORT, STORAGE AND
HANDLING
C
onditions for transporting the maChine
The tyre changer must be transported in its
original packing and stowed in the position
shown on the external packing.
- Packing dimensions:
• width .................................1543 mm
• depth ................................1140 mm
• height ................................1900 mm
- Weight of wooden packing:
• ........................................... kg 380
a
mbient Conditions for maChine transport
and storage
Temperature: -25° ÷ +55°C.
WARNING
Do not stack other goods on top of the packing
to avoid damaging it.
- E - Operator's manual
nglIsh