Practical Hints, Advice And Useful Information - Mondolfo Ferro AQUILA RAPTOR Manual De Uso

PRACTICAL HINTS, ADVICE
AND USEFUL INFORMATION
WARNING
To read before using the machine.
The following information is highly significant
as it facilitates the operator's job and/or helps
clarify any doubts that might arise.
p
raCtiCal
• Upon demounting, over-lubrication and/or
an unusually shaped rim edge may cause the
tyre to slip on the rim, making demounting
difficult. First, try using the bead breaker disc
in an upward direction to raise the tyre. Other-
wise, to speed up the procedure simply place
the manual Help accessory between the tyre
and the edge of the rim. This will help lifting
the bead quickly off the rim so that it can be
demounted (fig. 12).
• Upon demounting, if the tool cannot comple-
tely overturn the tyre bead to allow demounting
to start, the tyre bead may still be, or just have
been, inserted at 180° to the demounting zone.
In this case, it is essential to restore the ideal
condition, with the tyre bead inside the well of
the rim. This operation can be assisted with any
tool you wish (clamp supplied with the machine,
pliers, bead presser or lever) (fig.12A).
- E - Operator's manual
nglIsh
h
ints
12
• Upon demounting, if the tool cannot keep
the tyre bead engaged to allow demounting
to start, the tyre bead may still be inserted
on the underside. Try using the bead breaker
disc in an upward direction both to break the
tyre bead again and to help maintain a grip on
it (fig. 12B).
12a
12b
57