Optional Accessories Supplied On Request; Rim Centring/Clamping Accessories - Description And Use; Specified Conditions Of Use - Mondolfo Ferro AQUILA RAPTOR Manual De Uso

OPTIONAL ACCESSORIES
SUPPLIED ON REQUEST
For codes not included here, see the "ORI-
GINAL ACCESSORIES" handbook supplied with
the machine.
8-11100127 ............................. Lifter Kit
8-11100128 ..................... Bead presser Kit
8-11100159 .................... Accessory holder
8-11100160 ...................Quick beading Kit:
............................................ T.I. system
RIM CENTRING/CLAMPING
ACCESSORIES -
DESCRIPTION AND USE
For the diagram concerning optimal use of the
centring and clamping accessories depending on
rim type, see the accessories handbook supplied
with the machine.
52

SPECIFIED CONDITIONS OF USE

The tyre changer is designed exclusively to
mount and demount tyres, using the tools with
which it is equipped, following the instructions
in this manual.
WARNING
Any other operations carried out on the
machine are considered as improper use and
shall be construed as negligence.
These machines are equipped with an inflation
system independent from any other function
described above. Take great care when using
it (read the INFLATION chapter).
WARNING
You are strongly advised not to use non-original
equipment or tools.
The operator's position during the different
operating stages is shown in fig. 9.
A
WARNING
Keep hands well away from machine moving
parts.
WARNING
To stop the machine in an emergency:
- disconnect the power supply plug;
- isolate the compressed air supply network by
disconnecting the (quick-coupling) shut-off
valve (fig. 6).
- E
9
- Operator's manual
nglIsh