Handling And Installation; Packaging And Unpacking - Angelo Po FC 611 G Manual De Uso E Instalación

TABLE OF ALARM INDICATIONS
The information provided below is intended to identify the alarm
signals provided by the malfunction alarm light (A) and the gas
alarm light (B).
Alarm
Overload cutouts tripped
Malfunction
alarm
Safety thermostat tripped
No mains gas, gas pressure too low or
Gas alarm
flame detection failure
RECOMMENDATIONS FOR
IT

HANDLING AND INSTALLATION

GB
Important
When handling and installing the appliance comply
DE
with the information provided by the constructor di-
rectly on the packaging, on the appliance and in the
FR
instructions for use. If necessary, the person author-
ised to carry out these operations must organise a
ES
"safety plan" to protect the people directly involved.
English
Fault
Turn the knob to the "RESET" setting (this
may have to be done several times); if the
problem persists inform the after-sales
HANDLING AND INSTALLATION
6/2
A
Remedy
Inform the after-sales service
Inform the after-sales service
service

PACKAGING AND UNPACKING

The packaging is designed to reduce space and as appropriate
7/1
to the type of transport used.
To simplify transport, some components may be removed and
suitably protected and packed for transport.
The packaging carries all information necessary for loading and
unloading.
When unpacking, check that all components are present in the
correct quantities and are undamaged.
The packaging material must be properly disposed of in accord-
ance with legal requirements.
- 8 -
B
IDM-39614000400.tif
Notes
The oven's functions are disabled
so no cooking cycles can be
carried out
The oven's functions are disabled
so no cooking cycles can be
carried out
Stop cooking if the light remains on
IDM-3960200170.tif
7
7/2