Volume Control
Adjust Volume during a Call
Press the Volume key up or down to adjust the
earpiece volume during a call.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key
during an incoming call, you will answer the
call.
Silence an Incoming Call
• To silence the phone without answering the
call, press the Back key or press the
Volume key up or down.
• To silence the phone and answer the call,
press the Back key or press the Volume
key up or down and then press the Send
key.
Use Speed Dialing
Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can
use speed dialing you must save a phone
number as a contact and assign a speed dial
16
All manuals and user guides at all-guides.com
location to it. See "Assign Speed Dials to
Contacts" on page 36.
To call a contact that has a speed dial location:
1. Enter the one- or two-digit speed dial
2. Press the Send key.
Emergency Services
Call Emergency Services
You can call an emergency code even if your
phone is locked or your account is restricted.
When you call, your phone enters emergency
mode. This enables the emergency service
exclusive access to your phone to call you
back, if necessary. To make or receive regular
calls after dialing the code, you must exit this
mode.
To dial an emergency code:
1. Enter the 3-digit emergency code.
2. Press the Send key.
Note: Regardless of the 3-digit emergency
code (911, 111, 999, 000, etc.), your phone
operates as described above.
Exit Emergency Services
When you have completed the emergency call:
1. Select Exit.
2. Select Exit again to confirm your choice.
Note: To determine who has access to your
location, see "Set Location Information" on
page 59.
location.
Volume Control