Acon On Call Vivid Pal Manual Del Usuario página 17

Press the <▲> or <▼> button to switch between turning the meter beep
"On" and "Off". Press the <OK> button to confirm your selection.
7. Test Reminder: Test reminders are a useful way to remind you when to
test. You can set 1 to 5 reminders per day. Your meter is preset with the
test reminder disabled. You must turn it on to use this feature.
•
Press the <▲> or <▼> button to switch between turning the first Test
Reminder "On" and "Off". Press the <OK> button to confirm your
selection. When the Test Reminder is "Off", pressing the <OK> button
will go to the set up of the second Test Reminder. When the Test
Reminder is "On", pressing the <OK> button will go to the set up of the
time for the first Test Reminder. Press the <▲> or <▼> button to
adjust the first Test Reminder time. Press the <OK> button to confirm
the first Test Reminder time and then go to the second Test Reminder
set up.
•
When the Test Reminder is "Off" during the second Test Reminder set
up, pressing the <OK> button will go to the set up of the third Test
Reminder. When the Test Reminder is "On", pressing the <OK> button
will go to the set up of the time for the second Test Reminder. Press
the <▲> or <▼> button to adjust the second Test Reminder time.
Press the <OK> button to confirm the second Test Reminder time and
then go to the third Test Reminder set up.
•
Repeat the same set up procedure for Test Reminder 3, 4 and 5.
•
After finishing the fifth Test Reminder set up, it will then end the setup
mode and power off the meter.
If one or more test reminders have been set, the reminder symbol will always
appear on the LCD screen when the meter is turned on. The display sample is
All manuals and user guides at all-guides.com
OR
15