Acon On Call Vivid Pal Manual Del Usuario página 30

3. Touch the blood sample to the sample tip at the end of the test strip. If the
audio option is turned on, the meter will also beep to indicate the sample is
sufficient and the measurement has started. If you applied a drop of blood,
but do not see the starting of the count down, you may reapply a second
drop of blood within 3 seconds.
DO NOT:
• Apply sample to the front or back of the test strip.
• Smear the blood drop onto the test strip.
• Press your finger against the test strip.
4. The meter will count down from 5 to 1 and then display the measurement
results. The meter will also beep to indicate that measurement is complete.
Then your blood glucose level will display on the screen, along with the
unit measurement, date, and time of the test.
Blood Glucose results are automatically stored in the memory. To mark
invalid results and to prevent them from being included in the 7, 14, 30, 60
and 90-day averages, press the <▲> or <▼> button. A pound sign (#) will
appear on the display to show that the result will not be included when
calculating the 7, 14, 30, 60 and 90-day averages. If a result is marked by
accident, press the <▲> or <▼> button to unmark the result. After marking
the invalid result with a pound sign (#), press the <OK> button to confirm
the invalid result. After marking the invalid result, run the test again with a
new test strip.
All manuals and user guides at all-guides.com
28
OR