Maintenance; Replacing The Battery - Acon On Call Vivid Pal Manual Del Usuario

Proper maintenance is recommended for best results.

Replacing the Battery

®
Your On Call Vivid Pal Meter uses one 3.0 Volt CR 2032 lithium battery.
When the battery icon (
You should replace the battery as soon as possible. An "E-6" error message
will appear if the battery is too low to perform any more blood glucose tests.
The meter will not function until the battery is replaced.
Instructions:
1. Turn the meter off before removing the battery.
2. Turn the meter over to locate the battery cover. Slide the battery cover off
the top of the meter to get the battery.
3. Press the "+" symbol on the white plastic battery holder to loosen the old
battery.
All manuals and user guides at all-guides.com

Maintenance

) is blinking, it means the battery is running low.
35