Performing A Quality Control Test - Acon On Call Vivid Pal Manual Del Usuario

Performing a Quality Control Test

The quality control test confirms that the test strips and meter are working
together properly, and that you are performing the test correctly. It is important
to perform this test:
• Before you first use your meter.
• Before using a new box of test strips.
• When you suspect that the meter or test strips are not working properly.
• When you suspect that your test results are inaccurate, or if they are
inconsistent with how you feel.
• When you suspect your meter is damaged.
• After cleaning your meter.
• At least once a week.
1. Insert a test strip into the strip port, contact bars end first and facing up, to
turn on the meter and display all the display segments. If the audio option
is on, the meter will beep, signaling the meter is turned on.
NOT READY
2. Check the display to confirm that all the display segments turn on. Next, a
dash will move across the display. See illustrations above.
3. The meter is ready for testing when the blinking
blood drop and strip symbol appear. The display
will show the date time and the strip icon with the
blood sample icon blinking to indicate that the test
strip is inserted correctly and a drop of control
solution can be added.
Note: If the test strip has been inserted incorrectly, the meter will not turn
on.
All manuals and user guides at all-guides.com
NOT READY
17
NOT READY
READY TO TEST