Acon On Call Vivid Pal Manual Del Usuario página 23

Fingertip Testing
For fingertip sampling, adjust the depth penetration to reduce the discomfort.
You do not need the clear cap for fingertip sampling.
1. Unscrew the lancing device cover from the body of
the lancing device. Insert a sterile lancet into the
lancet holder and push it until the lancet comes to a
complete stop in the lancing device.
2. Hold the lancet firmly in the lancet holder and twist
the safety tab of the lancet until it loosens. Then pull
the safety tab off the lancet. Save the safety tab for
lancet disposal.
3. Carefully screw the cover back onto the lancing
device. Avoid contact with the exposed needle.
Make sure the cover is fully sealed on the lancing
device.
All manuals and user guides at all-guides.com
21