Hi" And "Lo" Messages - Acon On Call Vivid Pal Manual Del Usuario

Note: Dispose of blood samples and materials carefully. Treat all blood
samples as if they are infectious materials. Follow proper precautions and
obey all local regulations when disposing of blood samples and materials.

"HI" and "LO" Messages

The meter can accurately measure blood glucose concentrations between 0.6
to 33.3 mmol/L (10 to 600 mg/dL). "HI" and "LO" messages indicate results
outside of this range.
If "HI" appears on the display, the measured
concentration value is above 33.3 mmol/L (600 mg/dL).
The test should be retaken to ensure that no mistake
was made in the procedure. If you are certain the
meter is functioning properly and no mistakes were made in the procedure,
and your blood glucose is still consistently measured as "HI", it indicates
severe hyperglycemia (high blood glucose). You should contact your
healthcare professional immediately.
If "LO" appears on the display, the measured
concentration value is below 0.6 mmol/L (10 mg/dL).
The test should be retaken to ensure that no mistake
was made in the procedure. If you are certain the
meter is functioning properly and no mistakes were made in the procedure,
and your blood glucose is still consistently measured as "LO", it may indicate
severe hypoglycemia (low blood glucose). You should treat yourself for
hypoglycemia immediately as recommended by your healthcare professional.
Precautions and Limitations
Please refer to test strip insert.
All manuals and user guides at all-guides.com
30