On Call ® Vivid Blood Glucose Test Strips; Important - Acon On Call Vivid Pal Manual Del Usuario

®
On Call Vivid Blood Glucose Test Strips
®
The On Call Vivid Blood Glucose Test Strips are thin strips with a chemical
reagent which work with the On Call
measure the glucose concentration in whole blood. After the strip is inserted
into the meter, blood is applied to the sample tip of the test strip. The blood is
then automatically absorbed into the reaction cell where the reaction takes
place. A transient electrical current is formed during the reaction and the blood
glucose concentration is calculated based on the electrical current detected by
the meter. The result is shown on the meter display. The meter is calibrated to
display plasma equivalent results.
Sample Tip
Apply blood or control solution here
Check Window
Check to confirm that sufficient
sample has been applied
IMPORTANT: Apply sample only to the sample tip of the test strip. Do not
apply blood or control solution to the top of the test strip as this may result in
an inaccurate reading.
All manuals and user guides at all-guides.com
®
Correct
7
Vivid Pal Blood Glucose Meter to
Contact Bars
Insert this end of the test strip into
the meter until it stops
Incorrect