Additional Instructions For Work With The Battery Pack - SPARKY BPR 15Li Instrucciones De Uso Originales

sary, this has to be done by the manufacturer or
his agent in order to avoid a safety hazard.
▪ Do not disassemble the charger. Take it to an
authorised service centre when service or re-
pair is required. Incorrect re-assembly may re-
sult in the risk of fire or electric shock.
▪ To reduce the risk of an electric shock, unplug
the charger from the power supply before at-
tempting to clean it. Removing the battery alone
does not reduce the risk.
▪ Never attempt to connect two chargers together.
▪ Do not store or use the tool and battery pack in
locations where the temperature may reach or
exceed +40°C such as alongside sheds, trail-
ers or metal structures during summer.
▪ The charger is designed for use from a stand-
ard household electrical supply 230. Do not at-
tempt to connect the charger to a supply with a
different supply.
▪ If you wish to charge a second battery pack,
unplug the charger from the mains supply and
leave it for at least 15 minutes. After this time
you can charge a second battery pack.
▪ Under certain conditions, with the charger
plugged in to the power supply, the exposed
charging contacts inside the charger can be
shorted by foreign material. Foreign materials
of a conductive nature such as, but not limited
to, steel wool, aluminium foil, or any build-up
of metallic particles should be kept away from
charger cavities. Always unplug the charger
from the power supply when there is no bat-
tery pack in the cavity. Unplug charger before
attempting to clean.
▪ Do not freeze or immerse charger in water or
any other liquid.
VI - Additional instructions
for work with the
battery pack
WARNING: If the battery pack is
cracked or damaged in any other way, do not
insert it in the charger. There is a danger of
electric shock.
▪ Li-Ion batteries can be charged at any time and
this does not reduce their service life. Interrupt-
ing the charging procedure does not damage
the battery.
▪ The battery pack should be recharged when it
fails to produce sufficient power on jobs, which
Original instructions
All manuals and user guides at all-guides.com
▪
▪
▪
▪
▪
(1) Check current at receptacle by plugging in a
(2) Move charger and battery pack to a location
(3) If charging problems persist, take or send the
▪
▪
battery pack for any reason. If the plastic hous-
ing of the battery pack breaks or cracks, return
to a service centre for recycling.
READ All Of tHE INstRUCtIONs IN tHE
CHARGER sECtION Of tHIs mANUAl bE-
fORE AttEmPtING tO CHARGE tHE bAt-
tERy PACK fOR yOUR tOOl.
▪
▪
▪
were easily done previously. DO NOT CON-
TINUE to use under these conditions. Follow
the charging procedure.
The charger and battery pack may become
warm to touch while charging. This is a normal
condition, and does not indicate a problem.
To prevent overheating, do not charge battery
packs in direct sunlight in hot weather or near
heat sources.
Do not charge inside a box or container of any
kind. The battery must be placed in a well ven-
tilated area during charging.
When the battery is defective, liquid can escape
and come into contact with adjacent compo-
nents. Check any parts concerned. Clean such
parts or replace them, if required.
If the battery pack does not charge properly:
lamp or other appliance.
where the surrounding air temperature is ap-
proximately 0°C - 40°C.
tool, battery pack and charger to your local
service centre.
Do not incinerate the battery pack even if it is
seriously damaged or can no longer hold a
charge. The battery pack can explode in a fire.
To facilitate the cooling of the battery pack after
use, avoid placing the charger or battery pack
in a warm environment such as in a metal shed,
or an uninsulated trailer.
WARNING: Never attempt to open the
Always use correct SPARKY battery pack (the
one supplied with tool or a replacement pack
exactly like it.) Never install any other battery
pack. It will ruin your tool and may create a haz-
ardous condition.
Charge battery packs only in SPARKY charg-
ers.
Use an environmentally safe disposal unit at a
municipal waste disposal centre to dispose of a
damaged or worn out battery.
7
EN