Know Your Product; Operation - SPARKY BPR 15Li Instrucciones De Uso Originales

fIttING AND REmOvING tHE bAttERy
PACK
to remove the battery: Press simultaneously
the release tabs no both sides of the battery, and
pull it downward and out of the machine.
Prior to inserting the battery ensure that the switch
is in OFF position.
to install the battery: Insert the charged battery
into the slot until the battery is securely latched
with a click.
CHARGING tHE bAttERy
▪ The battery for this power tool is shipped par-
tially charged. You should charge the battery
fully before using the power tool for the first
time.
▪ Li-Ion battery is protected against deep dis-
charging. When the battery is empty, the ma-
chine is automatically switched off.
WARNING: Do not continue to press
the ON/OFF switch (3) after the machine has
been automatically switched off. This may dam-
age the battery.
The battery is equipped with a temperature con-
trol, which allows charging only within the temper-
ature range from 0 °C to approx. 45 °C. A longer
battery service life is achieved in this manner.
1. Insert the charger plug (14) into the mains sup-
ply socket. The LED indicator (15) starts to glow
signifying the presence of supply voltage.
2. Insert the charger jack (13) into the socket
(10) on the back lower part of the handle.
The green LED indicator (11) starts to blink,
signifying that charging process has begun.
Charging the battery takes about 1 hour. The
battery is fully charged when the indicator (11)
starts to glow continuously.
3. Take the charger plug out of the mains sock-
et.
4. Take the charger jack out of its socket on the
power tool handle.
WARNING: Do not operate the power
tool while the battery is charging.
tO ObtAIN tHE bEst lIfE fOR tHE
bAttERy
▪ When battery is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that
8
EN
All manuals and user guides at all-guides.com
▪
▪
▪
VII - Know your product
Before using the power tool, familiarize yourself
with all operating features and safety require-
ments.
Use the tool and accessories only for the applica-
tions intended. All other applications are expressly
ruled out.
1. Handle
2. Rechargeable battery pack
3. ON/OFF trigger switch
4. Forward/reverse switch
5. Operation mode switch
6. SDS-plus locking sleeve
7. Protective ring
8. LED work area light
9. Battery charge LED indicator
10. Socket for connecting the battery to the
1 1. Charger LED indicator
12. Charger
13. Jack for connecting the charger to the
14. Plug for connecting the charger to the mains
1 5. Mains LED indicator
16. Keyless chuck with SDS-plus adapter
17. SDS-plus to ¼" hex adapter
VIII - Operation
This power tool is designed for hammer drilling in
concrete, stone, masonry and various brittle ma-
terials. The rotary hammer can be used for drilling
in steel, wood, plastics, etc. by means of the key-
less chuck with adapter.
lED WORK AREA lIGHt
The machine is equipped with LED light (8) to il-
luminate the work area and improve visibility when
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause fire or explosion.
Always unplug the charger when not in use and
store in a dry secure place.
Do not charge batteries and do not store the
charger in premises where the temperature
may drop under 0ºC or exceed 40°C.
Each new battery reaches its full loading capac-
ity after several charge-discharge cycles (4-5).
If the battery has not been used for some time,
it is better to recharge it before use.
charger
battery
supply
bPR 15li