Publicidad
Step 6
Before beginning this step, separate the STRAIGHT CABINET RAILS
å
and CABINET RAILS. The CABINET RAILS have a large fl ange near
the roller. The STRAIGHT CABINET RAILS do not.
Fasten the STRAIGHT LEFT CABINET RAIL (GG) to the UPRIGHT (I).
å
Use two SILVER 7/16" FLAT HEAD SCREWS (HHH).
NOTE: The STRAIGHT CABINET RAILS are marked "Cabinet Right"
å
and "Cabinet Left" for easy identifi cation.
First, fasten two RAIL BRACKETS (KK) to the RIGHT END (A). Use
å
two BLACK 9/16" LARGE HEAD SCREWS (FFF).
Now, fasten the STRAIGHT RIGHT CABINET RAIL (FF) to the RAIL
å
BRACKETS (KK) on the RIGHT END (A). Use two SILVER 7/16" FLAT
HEAD SCREWS (HHH).
NOTE: Be sure to use the exact holes shown in the RAIL BRACKETS.
å
www.sauder.com/services
Roller end
GG
I
BLACK 9/16" LARGE HEAD SCREW
(4 used for the RAIL BRACKETS)
SILVER 7/16" FLAT HEAD SCREW
(4 used for the RAILS)
FF
A
FFF
101736
HHH
Roller end
KK
Page 11
Publicidad
